Azymoove Help

Building your robot

Base, head, torso, arms, weapon, armor and items, with 12 points.

Building your robot

A robot is built from parts, and each part changes its attributes. You have a budget of 12 points to spend on parts and items.

The parts

  • Locomotion base (body): decides how the robot moves, its health, its protection, its punch and how long it holds on off the arena. There are four kinds of locomotion with four models each: wheels (the fastest; only goes forward and in reverse), treads (slow and tough, heavier punch), legs (strafes with strafe) and spider legs (strafes, turns in place and holds on a little off the arena). They all cost 2 points.
  • Head (head): the sensors. Detection range, arc, turn and cost.
  • Torso (torso): the energy reserve, the recharge and a built-in ability, such as turbo, nano-repair, steel fists or cooler.
  • Arms (left_arm, right_arm): the look. The left arm punches; the right one carries the weapon.
  • Weapon (weapon): the right-arm gun. Cannon, railgun, shotgun or minigun.
  • Armor (armor): none, heavy plating, energy shield or reactive plates.
  • Items: up to 3, paid from the same budget. See Items and abilities.

The gun is on the arm: the robot shoots where its body points, so aiming is turning the body.

Building in the panel

In My robot → Assembly, pick the base, the head, the torso, each arm, the weapon, the armor and the items. The 3D preview shows the robot, and the panel shows the cost and the attributes computed by the engine. Then use Apply the assembly to the code → Validate code → Test → Save code.

Building in code

Pass the build to the base constructor. body picks the base, assembly picks the head, torso and arms (the id is model.slot, for example explorador.head) and parts picks the weapon and armor. Example: Guardian base, Explorer head, Loader torso, one arm from each model and the railgun:

class MyRobot extends Robot {
  constructor() {
    super({
      body: "guardiao",
      assembly: { head: "explorador.head", torso: "carregador.torso", left_arm: "forca.left_arm", right_arm: "coletor.right_arm" },
      parts: { weapon: "railgun" },
      items: ["nitro"],
    });
  }
  run() { while (true) { this.turnRadar(1); this.scan(); } }
}

Build rules

  • Everything fits with everything: any head, torso or arm works with any base. The base’s family decides the movement and doesn’t limit the upper body.
  • A left-out slot uses the part of the base’s model. With no constructor, the robot uses the full default: Guardian, cannon, no armor, no items.
  • Unknown parts, parts in the wrong slot or over budget are rejected by the check, and the robot leaves the battle right at the start (the reason shows in the log).
  • The build is fixed when the battle starts. When you save, code and build go into the same robot version.
  • Enemies the radar sees carry their parts in parts.